超強節電特性 High energy saving
相比傳統伺服電機節能率可到30%～80% ，可比同類伺服電機多節能5%～30%
Compared with traditional infecetion molding machines,energy-saving can reach 30%～80% ，
Compared with other servomotors,Dacheng can save 5%～30% energy
極佳成型穩定性 Better molding stability
閉環精密控制，相比傳統注塑機成型重復精度大大提高
Compared with conventioal injecton molding machines，repeatability is greatly improved due to servo motor close-loop control
高響應特性 Quick response
剛性高響應快，啟動時間僅需 0.02s～0.05s
High rigidity，fast response，the response time only 0.02～0.05 second
安靜、低噪音 Quiet & low noise
整機運行低噪音，低速運行更寧靜
The machine runs with low noise，and will be much quieter in a low speed
可靠的保壓性能 Reliable holding pressure
相比其他伺服電機保壓時間更長、更穩定，最高可達30min
Compares servo motors to guarantee presses the time to be longer，to be stabler， which can reach 30min
低溫升 Oil temperature rise slowly
伺服電機比例輸出液壓油，避免多余熱量產生，溫升低，液壓油甚至無需冷卻，實現大幅節水、節能
Servo motor proportionally deliver hydraulic oil base on our needs,it's can prevent unnecessary heat being generated，even in some cases does not require cooling system.
