|
|
|
產(chǎn)品名稱：
|
PEAK 8920VL2
|
|
型 號(hào)：
|
PEAK 8920VL2
|
|
價(jià) 格：
|
|
|
品 牌：
|
|
|
|
|
|
CPU Support Support Dual-Core IntelR XeonR processor 5100 series and Quad-Core IntelR XeonR Processor 5300 series (80W)
IntelR Embedded Processor List ( IntelR Longevity CPU):
Dual-Core IntelR XeonR Processor (5130 & 5140)
Dual-Core IntelR XeonR Processor LV (5128、5138、5148)
1066/1333 MHz FSB support
Main Memory 4 x 240-pin four channel DDR 2 FB-DIMM
Support ECC / Register DDR2 memory up to 8GB
Chipset IntelR 5000P memory controller Hub
IntelR 6321ESB I/O controller Hub
BIOS AMI BIOS
Plug & Play support
8M-bit flash ROM
Support Soft off、Wake on LAN、Power On by PS2 Keyboard Function Key、RTC alarm Power On
Power on after power failure
On-board LAN 2 x IntelR 82573L PCI Express Gigabit Ethernet
Support Boot From LAN (PXE)
Support Wake On LAN (When 5Vsb power available)
2 x RJ45 with LED
Display ATI ES1000 PCI graphic Controller
32MB DDR2 SDRAM VGA Memory
1 x DB15 VGA port
I/O Interface USB 2.0: 4 ports through I/O bracket
USB 2.0: 2 ports、with 1x6 JST (2.5mm )
Serial port: 2 ports、with 2x5 box-header (2.0mm) support RS-232 only
Parallel port: 1 port 、with 2x13 box-header (2.0mm)、Bi-directional、EPP/ECP
PS/2: 1 x Mini-Din Keyboard/Mouse
GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface
FAN: 2 x 4-pin FAN connectors (for CPU coolers)
1 x on board buzzer
1 x 2-pin power on switch
1 x SMBus 2.0 to Backplane
1 x 2-pin header for reset
1 x 5-pin header for key lock
1 x 2-pin header for power LED
1 x 2-pin header for HDD LED
Storage SATA: 2 ports、support RAID 0,1 through Backplane
IDE: 1 x 40-pin IDE connector、support Ultra ATA 33/66/100
1 x 2-pin JST (2.5mm) power connector for DOM (Disk On Module)
System Monitor 8 voltage (For +3.3V、+5V、Vcore x2、1.8V、1.5V、5Vsb、and Vbattery)
3 temperature (For 2 CPU and system)
3 FAN speed monitor ( 2 for CPU and 1 for ESB2)
Watchdog Timer Watchdog Timer is programmable by software from 0 to 255 seconds (Tolerance 10% under room temperature 25°C)
On-board RTC On-chip RTC with battery back up
1 x External Li-Lon battery
Power Input Power source from backplane through PICMG 1.3 Golden Finger、support ATX mode
Dimensions PICMG 1.3 SHB 338.58 mm (L) x 126.39 mm (W)
Environment Operating Temperature: 0°C ~ 60°C (for Board Level Only)
Storage Temperature: -20˚C to 85˚C
Relative Humidity:
Operating: 10%~90% (non-condensing)
Non-Operating: 5%~95% (non-condensing)
Certifications CE approval
FCC Class A
|
|
|
